At Highend show in Munchen (3-6 May-2012) we will for the first time show our new turntable Stabi M. First turntables will be available in November 2012 and estimated retail price will be 15.000 EUR.
Turntable Stabi M with 4Point tonearm will be playing in NAGRA / MARTENS room.
KUZMA STABI M WITH 4POINT TONEARM
STABI M
This is a modern turntable designed in a classic turntable style with the emphasis on providing the best possible record playback.
The turntable's size allows even
The turntable is assembled from various solid parts of aluminium making the construction rigid and absorbing vibration. On the outer sides of the main structure are solid aluminium plates, which give the turntable mass and further increase structural rigidity and damping.
The covered spikes within the legs allow horizontal levelling of the whole turntable.
The top aluminium plate under the platter, has an elastically underhung main frame and motor system below which is insulated from the outer main turntable's structure via four big elastic dampers, allowing for fine horizontal levelling of the platter and tonearm.
The platter is constructed from two pieces of 40mm thick aluminium with an acrylic damping plate sandwiched between making a very inert support for records.
The bearing has an inverted shaft with a ruby ball which gives precise, low noise rotation to a supporting subplatter.
The main frame carrying the main bearing and massive aluminium armboard, is bolted together from solid aluminium blocks forming a unique damped rigid support.
The motor system: The DC motor itself is specially mounted inside a brass cup and aluminium plate. This motor assembly is encapsulted and suspended inside a massive brass motor housing. Thus the main frame is doubly insulated from the motor system and yet still maintains rigidity, allowing for max torque momentum to be transmitted via the stiff plastic belt to the subplatter. This gives the platter a high torque drive with the positive properties of belt and idler drives, while minimising the negatives one.
The external power supply controls the DC motor with precise freqency and it has very fine speed adjustments. The control panel on the front plate of the turntable has start/stop and speed change functions. The full speed of platter on 33rpm is reached in just over 3 seconds.
Technical data:
Platter mass
Platter material aluminium&acrylic
Bearing type ruby ball- inverted
Shaft diameter
Chassis/levelling aluminium/yes
Turntable levelling yes
Motor 1 DC ( three phase)
Belt material special
External power supply yes
Speeds 33, 45
Armboard yes
No. of tonearms 1
Suspended special
Dimensions 610x500x290 mm
Finish black
Clamp yes
Mat yes
Lid yes ( hinges- detechable)
Accesories oil, allen keys
Options: armboards
More photos:
TOP PLATE
MAIN FRAME& MOTOR SYSTEM:
STABI M CLOSED DUST COVER:
