CAR 70-new
CAR 70 is now our top model featuring a diamond cantilever with integrated diamond tip made from one single piece of diamond, which is more rigid and damped then any other material used for cantilevers. The diamond tip, being a part of the cantilever avoids any glued joins between the cantilever and diamond needle.
The diamond cantilever is encapsuled in a sapphire tube which holds the coil's plate giving a rigid structure.
For first time is the whole motor assembly fitted into two piece solid sapphire housing which further increase rigidity of the cartridge and give motor assembly the most neutral support!
Product photos:
| Type | Low output MC |
| Coil wire | 4N Silver wire |
| Cantilever material | Diamond with diamond tip in one piece |
| Housing material | Sapphire- solid -two piece |
| Stylus | Micro ridge |
| Frequency response | 10 Hz- 45 kHz |
| Output voltage | 0,3 mV 3,54 cm/ 1 kHz |
| Channel balance | < 1,0 dB 1 kHz |
| Channel separation | > 30 dB 1 kHz |
| Tracking force | 2,1 g |
| Compliance | 10 x10-6 cm/dyne |
| Trackability | > 70 micron |
| Internal impedance | 6 Ohm |
| Load impedance | > 100 Ohm |
| Weight | 17 g |
| Suggested mounting torque for housing screws | 18-20 Ncm ( 0,18-0,20 Nm) |